Schedule Management
Calendar
Date Ranges
Exception Days
Week Schedules
Map days of week to day schedules
Day Schedules
Opening hours per day type
Project
Loading...
Loading description...
Site & Pools
📍 Main Site
Location not set Site ID: -🏊 Main Pool
Outdoor Pool Pool ID: -Project Summary
| Total Sites | 1 |
| Total Pools | - |
| Total Volume | - |
| HP Capacity | - |
Weather Data
| Station | - |
| Available Range | - |
| Data Points | - |
Recent Simulations
Project Configuration
Equipment
| 0-1, e.g. 0.92 | |
Control Settings
| Max temperature | 29 °C |
Bather Load
Water Temperatures
Energy Costs
Energy Reports
SimControl
Run Settings
Configuration
Leave override blank to use config value
| Parameter | Config | Override | |
|---|---|---|---|
| HP Capacity (kW) | - | ||
| Boiler Capacity (kW) | - | ||
| Default temp (°C) | - | schedule / config | |
| Target Offset (°C) | 0 | ||
| Max overheat °C above target |
- | ||
| Bathers/Day | - | ||
| Activity Factor | - | ||
| From Pool Settings | |||
| Wind Exposure | - | ||
| Solar Absorption | - | ||
Monthly Surface Heat Loss (kWh)
Last Simulation Run| Month | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||
Exception Days
Define holidays and special days (fixed dates or relative to Easter)
Exception Days
Loading...
Reference Days
Loading...
Weather Stations
Manage weather data sources
Configured Stations
Loading...
Weather Data
Select a station to view data and edit parameters
Yearly Averages
Loading...
Monthly Averages (All Years)
Loading...
Day and Night by Month (All Years)
Observed averages with the sun above the horizon at the station (day) and below it (night), from the station's position; filled hours left out. Day % = share of the month's hours that are day. Year = the average of the 12 months (day hours are mostly summer hours, so an average of all hours would mix the season into the day–night difference).
Loading...
Forecast accuracy: how to read the tables
MET Nordic forecasts against this station's observations (filled hours left out). Bias = average of forecast − observed (+ = forecast too high); MAE = average size of the error. By year and month: forecast hours 1–24 h ahead, the range a night's plan mostly uses. As stored, the forecast air temperature is only moved from the grid's height to the station's; wind and humidity are the model's. Shaded columns: after correction, fitted on these same data (so somewhat better than on new data): air and RH with each calendar month's mean bias removed; wind × the station's potential-wind factor × its exposure that month (needs the station's model roughness, under the map above).
Forecast Accuracy by Year
Loading...
Forecast Accuracy by Month (All Years)
Loading...
Forecast Accuracy by Month: Day
Hours with the sun above the horizon at the station.
Loading...
Forecast Accuracy by Month: Night
Hours with the sun below the horizon at the station.
Loading...
Forecast Accuracy by Hours Ahead
Loading...
User Management
Manage users and access permissions
Active Users
Loading...
Roles
| operator | Can edit schedules, calendars, and run simulations |
| admin | Full access including user management and system settings |
Note: When creating users, admin sets initial password. User must change password on first login.
Inactive Users
No inactive users
System
Database tools and system information
Deployment
Manage code deployment from GitHub
Database Migrations
Pending migrations in db/migrations/
Storage
Hourly simulation results take most of the database. They are only saved when "Save hourly data in database" is ticked (the Details tab computes a run's hours from its saved inputs), and kept for the newest 5 runs per project. Every run keeps its inputs, summary and daily results (reports, charts, baselines). Removing old hourly data also gives the space back to the disk.
Engine Verification
A fixed set of reference scenarios (frozen weather, solar data and configuration; tests/reference) and the results each simulator version gives for them. Verify runs every scenario with the engine in this browser, compares it with the stored results, and checks the strategy rules on every hour (late start, boiler last, no overshoot, banking first, energy balance...).
Database Schema
Export current database structure for version control.
System Info
| App Version | V140 |
| Simulator | - |
| PHP | - |
Debug Mode
Enable detailed simulator debugging in Simulations section
When enabled, shows Debug tab with detailed loss breakdowns, plan calculations, and hourly comparisons.